Floor Hardeners are being used as dry shakes for increasing the abrasion and impact resistance and compressive strength.

The floor hardeners are dry shake on the newly laid concrete at green condition and toweled with a power trowel. This floor hardener react with the available, surface, calcium hydroxide, a weak by- product of cement hydration and forms Calcium Silicate Hydrate.

The floor hardeners are available in METTALIC & NON METTALLIC forms based on the floor usage.

Application of Metallic Floor Hardener
Ware House, Textile Mill, Spinning Mill, Cotton Mill, Mechanical parts factory, Fabrication factory etc,

Application of Non-Metallic Floor Hardener
Computer & Hardware Factory, Electronics Industry, Food Industry, Food Processing Industry, Pharmaceuticals Industry etc.

Steel Fibre Reinforced Concrete
In Replacement to Conventional Steel bar Reinforcement for Primary & Secondary Reinforcing system.
Hooked Profile, Crimped Profile, Hooked Profile Flat, Hooked Profile Round, Crimped Profile Flat, Crimped Profile Round, Length: Ranges from 25 mm to 80 mm, Diameter: Ranges from 0.50 mm to 1.50 mm

Application: Concrete Industrial Floors, Tunnel Concrete Casting, Pavements, Shotcreting, Precast Element etc,

Polypropylene Fibre
Polypropylene Fibre Reinforcement is to control shrinkage cracks in Concrete to a variable extent.
Length: Ranges from 25 mm to 80 mm
Diameter: Ranges from 0.10 mm to 1.00 mm
Application: Industrial Floors, Plastering, Tunnel Concrete Casting, Shotcreting, Precast Element etc,

Epoxy Floor Toppings
Industrial Concrete Floors are subjected to just about every kind of risk- impact, abrasion, chemical attack and thermal shock. It’s for this reason that all concrete needs protection.

The thickness of the toppings ranges from 0.5 MM to 50 MM. The thicker the topping the greater the area which the load can be dispersed. Its resistance to chemicals is very good & is much better than concrete, tiles & marble flooring.

Epoxy Coating r Floor ranges from 100 micron to 1000 micron

Epoxy Self Leveling Floor ranges from 1mm to 3 mm

Epoxy Screed Floor ranges from 3 mm to 50 mm
Epoxy Flooring is suitable all kinds of industry viz,
Computer & Hardware Factory, Electronics Industry, Food Industry, Food Processing Industry, Pharmaceuticals Industry, Ware House, Textile Mill, Spinning Mill, Cotton Mill, Automobile factory

Pharma and food industry requires joint less floor to prevent from accumulation of Bacteria epoxy floor is recommended for Pharma & Food industry. In other type of flooring accumulation of bacteria will take place.